Generalized Requirements and Decompositions for the Design of Test Parts for Micro Additive Manufacturing Research

Mary Kathryn Thompson; Line Harder Clemmensen

doi:10.1016/j.procir.2015.07.075

Generalized Requirements and Decompositions for the Design of Test Parts for Micro Additive Manufacturing Research

Mary Kathryn Thompson^*, Line Harder Clemmensen

^*Corresponding author af dette arbejde

Publikation: Bidrag til tidsskrift › Konferenceartikel › Forskning › peer review

1 Citationer (Scopus)

Abstract

The design of experimental test parts to characterize micro additive manufacturing (AM) processes is challenging due to the influence of the manufacturing and metrology processes. This work builds on the lessons learned from a case study in the literature to derive generalized requirements and high level decompositions for the design of test parts and the design of experiments to characterize micro additive manufacturing processes. While the test parts and the experiments described are still work in progress, the generic requirements derived from them can serve as a starting point for the design of other micro additive manufacturing related studies and their decompositions can help structure future work.

Originalsprog	Engelsk
Tidsskrift	Procedia CIRP
Vol/bind	34
Sider (fra-til)	229-235
Antal sider	7
ISSN	2212-8271
DOI	https://doi.org/10.1016/j.procir.2015.07.075
Status	Udgivet - 2015
Udgivet eksternt	Ja
Begivenhed	9th International Conference on Axiomatic Design, ICAD 2015 - Florence, Italien Varighed: 16 sep. 2015 → 18 sep. 2015

Konference

Konference	9th International Conference on Axiomatic Design, ICAD 2015
Land/Område	Italien
By	Florence
Periode	16/09/2015 → 18/09/2015
Sponsor	Confindustria, Fraunhofer, GA Manuals, GE Oil and Gas

Bibliografisk note

Publisher Copyright:
© 2015 The Authors. Published by Elsevier B.V.

Adgang til dokumentet

10.1016/j.procir.2015.07.075

Citationsformater

@inproceedings{6e24891f07234ed789bff4ac15b2d7e9,

title = "Generalized Requirements and Decompositions for the Design of Test Parts for Micro Additive Manufacturing Research",

abstract = "The design of experimental test parts to characterize micro additive manufacturing (AM) processes is challenging due to the influence of the manufacturing and metrology processes. This work builds on the lessons learned from a case study in the literature to derive generalized requirements and high level decompositions for the design of test parts and the design of experiments to characterize micro additive manufacturing processes. While the test parts and the experiments described are still work in progress, the generic requirements derived from them can serve as a starting point for the design of other micro additive manufacturing related studies and their decompositions can help structure future work.",

keywords = "Additive manufacturing, decomposition, design of experiments, metrology, micro manufacturing, requirements",

author = "Thompson, {Mary Kathryn} and Clemmensen, {Line Harder}",

note = "Publisher Copyright: {\textcopyright} 2015 The Authors. Published by Elsevier B.V.; 9th International Conference on Axiomatic Design, ICAD 2015 ; Conference date: 16-09-2015 Through 18-09-2015",

year = "2015",

doi = "10.1016/j.procir.2015.07.075",

language = "English",

volume = "34",

pages = "229--235",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier",

}

TY - GEN

T1 - Generalized Requirements and Decompositions for the Design of Test Parts for Micro Additive Manufacturing Research

AU - Thompson, Mary Kathryn

AU - Clemmensen, Line Harder

PY - 2015

Y1 - 2015

N2 - The design of experimental test parts to characterize micro additive manufacturing (AM) processes is challenging due to the influence of the manufacturing and metrology processes. This work builds on the lessons learned from a case study in the literature to derive generalized requirements and high level decompositions for the design of test parts and the design of experiments to characterize micro additive manufacturing processes. While the test parts and the experiments described are still work in progress, the generic requirements derived from them can serve as a starting point for the design of other micro additive manufacturing related studies and their decompositions can help structure future work.

AB - The design of experimental test parts to characterize micro additive manufacturing (AM) processes is challenging due to the influence of the manufacturing and metrology processes. This work builds on the lessons learned from a case study in the literature to derive generalized requirements and high level decompositions for the design of test parts and the design of experiments to characterize micro additive manufacturing processes. While the test parts and the experiments described are still work in progress, the generic requirements derived from them can serve as a starting point for the design of other micro additive manufacturing related studies and their decompositions can help structure future work.

KW - Additive manufacturing

KW - decomposition

KW - design of experiments

KW - metrology

KW - micro manufacturing

KW - requirements

U2 - 10.1016/j.procir.2015.07.075

DO - 10.1016/j.procir.2015.07.075

M3 - Conference article

AN - SCOPUS:84948466799

SN - 2212-8271

VL - 34

SP - 229

EP - 235

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 9th International Conference on Axiomatic Design, ICAD 2015

Y2 - 16 September 2015 through 18 September 2015

ER -